biketailor-forsale.jpg

Vintage bicycle frames for sale

Why build a vintage bicycle?

A vintage bike frame is often a great place to start for a custom build, providing a high quality platform to put your mark on.  Keep it period correct, or go modern; the choice will depend on your budget, aesthetic preferences and riding aspirations. 

 

I have a great selection of high quality steel frames and forks in a range of sizes, or we can find something else if there isn't something here that you're after.

Come grab an espresso and take a look or: call me on 0415 755 321 or email to enquire. 

Eddy Merckx Corsa Extra road bike frameset

Team Panasonic | 1986/87

As ridden by Phil Anderson, this is regarded as one of the best frames of the day. Utilising Columbus SLX tubing with Campagnolo fork ends and drop outs for a stiff and light ride.

 

This particular frame is labelled as the team bike of Bas Luijendijk and is in used, but good condition. There are several small paint chips, but no dents or cracks. Paint and decals are original.

 

An ideal candidate for a high end build. 

  • Tubing: Columbus SLX

  • Top tube: 570mm

  • Seat tube: 575 mm

  • Head tube: 157mm

  • Rear spacing: 130mm

  • Bottom bracket: Ital 70mm

  • Seat post: 27.2mm

Price: $1500

Casati road bike frameset

Gold Line S | 1980s

Exquisite paint and pantographing details, this frame is special.  Internal shift cable routing for the front and rear derailleur and rear brake cables - a very rare and unusual find for a frame of this era.  Comes with custom pantographed Campagnolo friction shifters with centrally mounted position for optimised aerodynamics.

 

Columbus SL tubing and Campagnolo fork ends and drop outs. Paint is in very good condition with only minor blemishes as expected for its age, no dents or cracks. Paint and decals are original.

 

A prime candidate for a high-end build.

  • Tubing: Columbus SL

  • Top tube: 505mm

  • Seat tube: 480 mm

  • Head tube: 90mm

  • Rear spacing: 126mm

  • Bottom bracket: Ital 70mm

  • Seat post: 27.2mm

Price: $1300

Concorde road bike frameset

Gavina | ~ 1998-99

This is a high end Concorde racing frame that was most likely made in Italy, by Giovanni Pelizzoli, in the Bilato factory who also made frames for Ciocc and others. The Ciocc made Concordes are recognised by the presence of an Italian flag braze-on on the top tube. Note the race number holder too.

 

Columbus SL tubing and Columbus fork ends and drop outs.

 

The paint colours are sun faded but the paint is in other wise good condition.

 

The bike has been carefully cut & polished with correct/accurate decals applied.

 

Chrome is in good condition. There is some degradation on the the chain stay and a couple of small areas on the fork blades. 

 

Fantastic patina that comes with a 30 plus year old frame or an ideal candidate for a full blown restoration. 

  • Tubing: Columbus SL

  • Top tube: 570mm

  • Seat tube: 580 mm

  • Head tube: 155mm

  • Rear spacing: 126mm

  • Bottom bracket: Ital 70mm

  • Seat post: 27.2mm

Price: $1000

Bardini road bike frameset

1970s / 1980s

The Bardini brand is not known by many despite being an immaculate example of high end Italian frames from the  70’s/80’s. 

 

This frame is built with Columbus SL tubing and Campagnolo fork ends and drop outs.  The paint and lug work are absolutely beautiful and original with minimal blemishes suggesting this may be new old stock (NOS).

 

Mesmerising hanging on the wall or build it up and ride the hell out of it - a beautiful frameset worthy of a rigorous and thoughtful build.

  • Tubing: Columbus SL

  • Top tube: 530mm

  • Seat tube: 535mm

  • Head tube: 125mm

  • Rear spacing: 126mm

  • Bottom bracket: Ital 70mm

  • Seat post: 27.2mm

Price: $900

Viner road bike frameset

1970s / 1980s

A beautiful example of this well regarded Swiss brand.  Built using strong Columbus Cromor tubing, this frameset would make a great second bike or commuter.  Paint and decals are immaculate and likely were re-done at some point in its recent history, while the chrome on the forks has some pitting, but may well clean up nicely with some fine steel wool and gentle buffing.  Some lovely lugs and pantographing throughout.

  • Tubing: Columbus Cromor

  • Top tube: 555mm

  • Seat tube: 565 mm

  • Head tube: 152mm

  • Rear spacing: 126mm

  • Bottom bracket: Eng 68mm

  • Seat post: 27.0mm

Price: $600

Daccordi road bike frameset

1970s / 1980s

One of the oldest brands still producing bikes today, Daccordi is an icon of Italian Road bicycles. This particular frame is made of high end Columbus SL tubing with Campanolo fork ends and drop outs.  

The paint and decals are original and shows the age of this frameset. It is well used with numerous chips and blemishes. There is a slight dent on the seat tube, but it does not affect the frame structurally or its performance.

 

This would make an incredible commuter or wet weather ride. 

  • Tubing: Columbus SL

  • Top tube: 570mm

  • Seat tube: 580 mm

  • Head tube: 165mm

  • Rear spacing: 126mm

  • Bottom bracket: Ital 70mm

  • Seat post: 27.2mm

Price: $600

"Motta" road bike frameset

Unknown brand | 1980s

The origin and maker of this frameset is unknown.  It is not a Motta, but was re-painted by the famous Australian frame builder and painter GEFSCO.  As a result it presents absolutely beautifully and is a real eye-catcher.  Tubing is unknown, but the drop outs are Campagnolo suggesting the frame is high end.  This would build into a beautiful neo retro roadie or keep it classic, it’ll be hard to miss either way.

  • Tubing: Unknown | painted by GEFSCO

  • Top tube: 555mm

  • Seat tube: 555 mm

  • Head tube: 145mm

  • Rear spacing: 126mm

  • Bottom bracket: Eng 68mm

  • Seat post: 27.2mm

Price: $350

Abeni road bike frameset

1980s

A well known Australian brand, this particular frameset was made to order by Tecnotrat in Italy.  The tubing is “special steel tubes heat treated” by Tecnotrat and is very light.  The forks are particularly slender and elegant.  Campagnolo fork ends and dropouts and some stunning brow metallic paint and white pantographing.  Paint is immaculate and likely has been re-done at some point in the frame’s recent history.

Would make a lovely classic ride.

  • Tubing: Tecnotrat

  • Top tube: 565mm

  • Seat tube: 570 mm

  • Head tube: 156mm

  • Rear spacing: 126mm

  • Bottom bracket: Eng 68mm

  • Seat post: 27.0mm

Price: $400

CONTACT

U6, 1 Bronwyn St,

Caloundra West, Sunshine Coast, Queensland, 4551

0415 755 321

shop@biketailor.com

biketailor.com

SHOP HOURS

Monday: 11am–5pm

Tuesday: 12–6pm

Wednesday: 11am–5pm

Thursday: 12–6pm

Friday: 11am–5pm

Saturday: closed

Sunday: closed

JOIN MAILING LIST
biketailor-logo-mono.png
SOCIAL MEDIA
  • Facebook - Black Circle
  • Instagram - Black Circle